IBM u-1070 - Manual (Page 7)

7 EN
2
Hold the camera, and compose the
shot.
3
Press the shutter button halfway
down to focus on the subject.
When the camera focuses on the subject, the
exposure is locked (shutter speed and aperture
value are displayed), and the AF target mark
changes to green.
The camera was unable to focus if the AF target
mark fl ashes red. Try focusing again.
“Focusing” (p. 50)
●
●
Shooting with optimum
aperture value and shutter
speed (P mode)
In this mode, automatic camera shooting can
be used while also allowing changes to a wide
range of other shooting menu functions, such as
exposure compensation, white balance, and so
on when needed.
1
Slide the lens barrier down to turn
on the camera.
If the P mode is not displayed, press the K
button a few times to change the mode.
Slide the lens barrier back up to turn off the
camera.
Shooting, Playback, and Erasing
1/400 1/400 F3.5 F3.5
P
AF target mark
Press halfway
Shutter speed Aperture
value
12 M 12 M
44
IN N ORM N ORM
P
Monitor (standby mode screen)
Number of storable still
pictures (p. 54)
P
G SCN
Current shooting mode indicator
1/400 1/400 F3.5 F3.5
P
Horizontal grip
Vertical grip
Monitor
d4399_e_basic_000_book_cs2e.indb7 7 d4399_e_basic_000_book_cs2e.indb7 7 11/14/2008 9:50:55 AM 11/14/2008 9:50:55 AM