How to run the diagnostics – IBM THINKPAD 760C/CD (9546) User Manual

Page 385

Advertising
background image


Icon

Meaning

3

Secondary battery status

4

Main battery status

5

Diskette drive in-use

6

Hard disk in-use

7

Numeric lock

8

Caps lock

9

Scroll lock

How to Run the Diagnostics

Use either the TrackPoint III or the cursor move keys to
interact with the tests. The Enter key works the same as
selecting the OK icon to reply OK.

1. Press and hold the F1 key; then power-on the

computer. Hold the F1 key down until the
Easy-Setup screen appears.

2. Select Test and press Enter.
3. Select a device and press Enter to run the test.
4. The test progress screen appears.
5. “OK” appears when the test ends without any errors.
6. Start the Advanced Diagnostic test by pressing

Ctrl

+

A on the basic diagnostic menu screen.

7. Select Tool to install the tools.

Note: The following tools are required.

FDD:

Erasable 2HD diskette

Parallel:

Wrap plug (P/N 72X8546)

Serial:

Wrap plug (P/N 72X8546)

PCMCIA:

PC Test Card (P/N 35G4703)

CDROM:

Any CD (data CD is
recommended)

8. Select a device, press the Spacebar, and install the

tool. Multiple devices can be selected by repeating
this step.

A

mark appears beside the selected devices.

9. Select OK and press Enter if the selection is OK.

ThinkPad 760 (9546, 9547)

373

Advertising