IBM THINKPAD 760C/CD (9546) - Manual (Page 573)

Testing the SCSI Subsystem
Note: If a SCSI adapter is installed in an PCI adapter
card slot, remove it before running the SCSI
diagnostic program.
1. When you select Test SCSI Subsystem on the Main
Menu, the diagnostics program checks the system
configuration for SCSI devices and displays the
following if no SCSI controller is found.
If a SCSI controller is found, the computer goes on to
initialize the SCSI devices and displays the following.
SCSI Subsystem Diagnostics Utility V2.1
Enter F3=Exit
Scanning Target #n
2. If the initialization fails, the following screen appears.
SCSI Subsystem Diagnostics Utility V2.1
Enter F3=Exit
SCSI Initialization Failed
ThinkPad SelectaDock Docking System 561