JVC TV-13143 - Manual (Page 48)

46
NOTE: • It is recommended that the tape speed be set to the SP mode on the TV/VCR for best results.
• Unauthorized recording of copyrighted television programs, films, video cassettes and other materials may
infringe the rights of copyright owners and be contrary to copyright laws.
Press the REC b utton and the
PLAY button simultaneously
on the remote control or the
CONNECTION TO CAMCORDER CONNECTION TO ANOTHER VCR
For duplicating a previously recorded tape from a camcorder,
follow the camcorder manufacturer’s instructions. A typical
camcorder dubbing hookup is shown below.
DUPLICATING A VIDEO TAPE
Press the INPUT button twice select AUDIO/
VIDEO input position, The "LINE" will appear on
the screen. Insert a blank cassette with the erase preven-
tion tab intact into the TV/VCR.
Insert a previously recorded cassette into the
playback VCR or Camcorder.
LINE
VIDEO OUT AUDIO OUT
PLAYBACK VCR
AUDIO/VIDEO CORD (NOT SUPPLIED)
RECORDING TV/VCR
To AV Jack
To VIDEO/AUDIO IN
AUDIO/VIDEO CORD
(NOT SUPPLIED)
PLAYBACK
CAMCORDER
3
2 1
If you connect the TV/VCR to another VCR or CAMCORDER, you can duplicate a previously recorded tape.
Make all connections before turning on the power.
Press the PLAY button on the
playback VCR. Press the PAUSE button
on the TV/VCR to begin
the duplicating process.
REC button on the TV/VCR, then
press the P AUSE button.
RECORDING TV/VCR
AUDIO IN VIDEO IN
INPUT
REC PLAY PAUSE
PLAY
PAUSE
4 5
5B20401A-E/P44-BACK 1/10/02, 4:55 PM 46