John Deere Aercore 2000 - Manual (Page 8)

DKA2203 (08-04) (Ref 2992) Litho in U.S.A.
SPECS 800 1000 1500 2000
MACHINE:
Coring Width
58 in. (1,473 mm) 37.5-in. (101.6 cm) 57.5-in. (152.4 cm) 77.5-in. (190.6 cm)
Coring Depth Up to 3.5 in. (88.9 mm) Up to 4 in. (100 mm) Up to 4 in. (100 mm) Up to 4 in. (100 mm)
Coring Pattern 1.4 x 1.4 in. w/mini tines (36 x 36 mm) Variable 2.4 in. x 2.0 in. to 5.0 in. Variable 2.4 in. x 2.0 in. to 5.0 in. Variable 2.4 in. x 2.0 in. to 5.0 in.
2.0 x 2.0 in. (50 x 50 mm) (61 mm x 51 mm to 127 mm) (61 mm x 51 mm to 127 mm) (61 mm x 51 mm to 127 mm)
2.6 x 2.0 in. (65 x 50 mm) Variable 3.2 in. x 2.0 in. to 5.0 in. Variable 3.2 in. x 2.0 in. to 5.0 in. Variable 3.2 in. x 2.0 in. to 5.0 in.
2.9 x 2.0 in. (75 x 50 mm) (81.3 mm x 50 mm to 125 mm) (81.3 mm x 50 mm to 125 mm) (81.3 mm x 50 mm to 125 mm)
PRODUCTIVITY: with 3x tine holders. with 3x tine holders. with 3x tine holders.
1.4 in. x 1.4 in. (36mm x 56mm) 11,025 sq. ft./hr. (1024 sq. m/hr)
2.0 in. x 2.0 in. (50mm x 50mm) 15,750 sq. ft./hr. (1440 sq. m/hr.)
2.0 in. x 2.6 in. (50mm x 65mm) 20,710 sq. ft./hr. (1933 sq. m/hr.)
2.0 in. x 3.0 in. (50mm x 75mm) 22,835 sq. ft./hr. (2123 sq. m/hr.)
2.4 in. x 2.0 in. (30mm x 50mm) 20,013 sq. ft./hr. (1,859 sq. m/hr) 30,020 sq. ft./hr. (2,789 sq. m/hr) 40,026 sq. ft./hr. (3,722 sq. m/hr)
2.4 in. x 2.5 in. (30mm x 64mm) 25,016 sq. ft./hr. (2,324 sq. m/hr) 37,525 sq. ft./hr. (3,486 sq. m/hr) 50,033 sq. ft./hr. (4,653 sq. m/hr)
2.4 in. x 3.0 in. (30mm x 76mm) 30,020 sq. ft./hr. (2,789 sq. m/hr) 45,030 sq. ft./hr. (4,183 sq. m/hr) 60,040 sq. ft./hr. (5,584 sq. m/hr)
2.4 in. x 4.0 in. (30mm x 101mm) 40,026 sq. ft./hr. (3,718 sq. m/hr) 60,039 sq. ft./hr. (5,578 sq. m/hr) 80,053 sq. ft./hr. (7,445 sq. m/hr)
2.4 in. x 4.5 in. (30mm x 111mm) 45,030 sq. ft./hr. (4,069 sq. m/hr) 67,544 sq. ft./hr. (6,282 sq. m/hr) 90,059 sq. ft./hr. (8,376 sq. m/hr)
2.4 in. x 5.0 in. (30mm x 127mm) 50,033 sq. ft./hr. (4,648 sq. m/hr) 75,049 sq. ft./hr. (6,972 sq. m/hr) 100,066 sq. ft./hr. (9,306 sq. m/hr)
Weight 1,367 lb. (620 kg) 865 lb. (392 kg) 1,100 lb. (499 kg) 1,728 lb. (772 kg)
Height 39 in. (990 mm) 39 in. (990 mm) 39 in. (990 mm) 39 in. (990 mm)
Width 58 in. (1,473 mm) 45.7 in. (1,160 mm) 65.5 in. (1,662 mm) 85.7 in. (2,177 mm)
Length 84 in. (2,134 mm) 33 in. (845 mm) 33 in. (845 mm) 33 in. (845 mm)
Manufacturer Kohler Command 18 hp
Horsepower 25 hp (18.6 kW)*
Cycle 4
Displacement 44.2 cu. in. (725 cc)
Fuel Capacity 5 U.S. gal. (18.9 L)
Fuel Mixture Regular-Unleaded, Leaded
Ignition Solid State
Air Filter 1 dual element
Starter Electric/Solenoid
Transmission (Coring) 1st, 2nd, 3rd and, 4th gear
Transmission (Transport) Transport 3.5 mph (4.5 km/h)
Coring Swath 31.5-in. (800.1 mm)
Coring Head Drive Matched dual v-belts
Lift System
Electro-hydraulic, electric pump,
single hydraulic actuator
SPECS TC125 CP48
Vehicle Requirements
Powered by compact utility tractor or HDUV with a Selective Control Valve (SCV).
Hydraulic requirements: 6 gpm (23 Lpm), 2,000 psi (13.8 mPa) (min. continuous)
600-lb. towing capacity and 12-volt electrical system
Gathering Width 48 in. (121.9 cm) 48 in. (121.9 cm)
Hopper Capacity 25 cu. ft. (0.71 cubic meters)
Hitch Attaches with std. 3/4 in. (19 mm) hitch pin Attaches with standard 1-7/8-in. ball hitch
Offset Towing Feature:
Allows the unit to be towed either directly behind or offset to the left side of vehicle.
Easily performed while the operator remains seated.
Allows unit to be towed either directly behind or offset to
right side of the towing vehicle.
Hydraulic Connection 3 quick-disconnect couplers (2 rotary brush, 1 lift cylinder)
Lift Hydraulic powered lift cylinder for dumping
Pick-Up-System Hydraulic powered rotary brush
Brush Speed 500-600 rpm, direct drive hydraulic motor 750-850 rpm brush speed / 1,500-1,600 rpm blade speed
Rollers
Brush aggressiveness & flotation controlled by 6 in. (15.24 cm) dia. full width roller behind
rotary brush. Roller height adjustable to accommodate turf conditions and brush wear.
Productivity Clears an average green in 15 minutes Clears an average green in 10 minutes; one-person operation
Tires 26.5x14x12 Two 18x 8.5-8 4-ply turf tires
DIMENSIONS:
Height
64 in. (162.5 cm) - lowered, 145 in. (368 cm) - raised 32 in. (812.8 mm)
Length 138 in. (350.5 cm) 96 in. (2438.4 mm) includes tongue
Width 94 in. (238.7 cm) 75 in. (1905 mm)
Weight 1,250 lb. (578 kg) 580 lb.
Dump Height Clearance 49 in. (120 cm)
Controls Engagement of the clutch is done from the operator’s station
Engine Manufacturer Kohler Command Pro 12 hp* (8.9 kW)
Tire Pressure 10-12 psi (69-83 kpa)
Brush Eight-section polyester bristle
Brush Adjustments Adjusted by height adjustment cranks on both sides of unit
TINE SIZES FOR ALL:
Tubular 1 in. (25.4 mm)
3⁄4 in. (19 mm)
5⁄8 in. (16 mm)
1⁄2 in. (12.7 mm)
3⁄8 in. (10 mm)
Open Side 1 in. (25.4 mm)
7⁄8 in. (22.23 mm)
13⁄16 in. (20.64 mm)
3⁄4 in. (19 mm)
5⁄8 in. (16 mm)
1⁄2 in. (12.7 mm)
3⁄8 in. (10 mm)
1⁄4 in. (6.35 mm)
Solid * 5⁄8 in. (16 mm)
3⁄8 in. (9.5 mm)
* Cross with 1⁄2-in. (12.7 mm) rib
and Super cross with 3⁄4-in.
(19 mm) rib available on
Aercore 800, 1000, and 1500
5 mm needle tine, 8 mm needle
tine available on Aercore 1000
and 1500
This literature has been compiled for worldwide circulation. While general information, pictures and descriptions are provided, some illustrations and text may include finance, credit, insurance,
product options and accessories NOT AVAILABLE in all regions. PLEASE CONTACT YOUR LOCAL DEALER FOR DETAILS. John Deere reserves the right to change specification, design and price
of products described in this literature without notice. John Deere’s green and yellow color scheme, the leaping deer symbol, and JOHN DEERE are trademarks of Deere & Company.
* Engine hp is provided by engine manufacturer for comparison purposes only. Actual operating hp will be less.
www.JohnDeere.com/golf
Vertis QCA
1300 19th Street, Suite 200
East Moline, IL 61244
Cyan Magenta Yellow Black
08-2203 Page 8