JVC LCT2141-001A-H - Manual (Page 10)

10
You can set <MENU> and <SET-UP MENU> screen items, picture adjustment items and
the volume level to their factory-set (initial) values.
1. Press the POWER ( ) switch to turn the power
OFF (
—
).
2. While pressing both MENU button and PHASE ( )
button, press the POWER ( ) switch to turn the power
ON (
_
).
The <SET-UP MENU> RESET screen is displayed.
Note:
● The <SET-UP MENU> RESET screen will not be
displayed if the MENU or PHASE buttons are pressed
for a very short time. Keep pressing them until the
display screen appears.
3. Press the CONTRAST ( ) button.
Initialization starts.
* The <SET-UP MENU> RESET screen disappears
automatically after fi nishing initialization.
Note:
● To cancel initialization.
Press the VOLUME/SELECT [+] or [–] buttons.
* The <SET-UP MENU> RESET screen disappears after
cancelling initialization.
<SET–UP MENU> RESET
Are you sure ?
“Yes” then <CONTRAST>
“No” then <+> or <–>
HOW TO INITIALIZE THE SETTING
SCREEN DISPLAY AND SELECTIONS IN THE
<SET-UP MENU> RESET MODE
<SET-UP MENU> RESET screen
PHASE MENU POWER
_ON
—OFF
CONTRAST
POWER
_ON
—OFF
Initial settings
Sorts
Functions (Items)
Initialization
(setting)
<MENU> screen
SHARPNESS
COLOR SYSTEM 00
AUTO
<SET-UP MENU> screen
H. POSITION
WHITE BALANCE
R. CUT OFF
G. CUT OFF
B. CUT OFF
R. DRIVE
B. DRIVE
CONTROL LOCK
00
00
00
00
00
00
OFF
Picture adjustment
PHASE
CHROMA
CONTRAST
BRIGHT 00
00
00
00
Volume
VOLUME 20
02-15EN_TM-A14E_f.indd 10 02-15EN_TM-A14E_f.indd 10 06.6.9 3:13:35 PM 06.6.9 3:13:35 PM