JVC KW-NT3HD - Manual (Page 35)

35
ENGLISH
As the traffic information is transmitted by radio
stations, JVC cannot assume responsibility for the
completeness or accuracy of the information.
Traffic information on the map
• Traffic icons are displayed on the map when its scale
is between 80 ft (25 m) and 1.5 mi (2.5 km) with
<Traffic Icon> setting activated (
☞ page 41).
How traffic information is reflected in
navigation
The traffic information is reflected in navigation
differently according to <Bypass Traffic> setting.
1
Traffic icon (
☞ page 36)
Congestion
Using information service
(Only for KW-NT3HDT)
2
Auto The System automatically calculates
a new route when you approach a
traffic event.
Manual Operating buttons appear on
the screen when you approach a
traffic event. Recalculate the route
manually. (
☞ below)
Off The System does not take traffic
information into account.
• It may not avoid a congestion even if <Auto> is
selected.
When <Manual> is selected...
• The traffic alert indication disappears while you are
checking due to a change of traffic conditions. The
traffic alert indication also disappears if you do not
confirm the rerouting in one minute.
Shows the detail of the alert
Recalculates the route Ignores the traffic alert
Appears when you approach a traffic
event on your route
Using the traffic information service
This function is available on KW-NT3HDT only, not equipped with on KW-NT3HD.
EN_KW-NT3[J]f.indb 35 EN_KW-NT3[J]f.indb 35 10.4.2 0:57:01 PM 10.4.2 0:57:01 PM