Jonsered CS 2117 EL - Manual (Page 4)

E
N
G
L
IS
H
3
Motor 1700 2000
Rated voltage VAC 220-240 230
Rated output W 1700 2000
Frequency Hz 50/60 50
Slip clutch Yes No
Electronic start control - Yes
Electronic speed control - Yes
Electronic overload protection - Yes
Weight
Without guide bar and chain kg 4,4 4,4
With 14” guide bar and chain kg 5,1 5,1
Chain lubrication
Oil tank volume litres 0.1 0.1
Oil consumption approx. litres 0.1/20 min. 0.1/20 min.
Oil pump auto auto
Noise levels
Equivalent noise intensity at operator’s ear,
according to international standards dB(A) 95 95
Noise emissions
Sound power, measured LW dB(A) 104 104
Sound power, guaranteed LWA dB(A) 106 106
Vibration
Front handle m/s2 4.4 4.4
Rear handle m/s2 5,4 5,4
Chain/guide bar
Recommended bar length inches/cm 12/30 12/30
inches/cm 14/35 14/35
inches/cm 16/40 16/40
Effective cutting length inches/cm 12/30 12/30
inches/cm 14/35 14/35
inches/cm 16/40 16/40
Chain speed, unloaded m/sec. (drive) 14,5 (6 tooth) 15,2 (6 tooth)
Chain speed, rated output m/sec. (drive) 12,5 (6 tooth) 12,2 (6 tooth)
Chain pitch inches 3/8 3/8
Gauge inches/mm .050/1.3 .050/1.3
Number of drive links 12”/14”/16” 45/52/56 45/52/56
�
TECHNICAL SPECIFICATIONS
inch inch/mm inch/mm inch/mm inch/cm/dl