Getting started, Installing usb driver (for windows 98se only) – JVC XA-F57P User Manual
Page 8
8
INSTALLING USB DRIVER
(FOR WINDOWS 98SE ONLY)
Follow these instructions to load software that enables a computer to
recognize the Digital Audio Player.
1.
Insert the CD-ROM into the CD-ROM drive of your PC.
2.
Turn off the Digital Audio Player and connect it to your PC with the
USB connector.
3.
Follow the on-screen instructions to install the driver from the CD-
ROM.
On a screen to search for the location of the Digital Audio Player‘s
driver, click the [Browse] button and select CD-ROM drive and then
proceed to the next screen.
4.
Be sure that the installation completion screen appears.
5.
Reboot the PC.
• If you are using Windows XP, Me or 2000, you do not need to install
the USB driver on the CD-ROM.
GETTING STARTED
Make sure that no programs, such as games or anti-virus software, are
running on the PC. If programs are open, close and exit from the
programs before proceeding.
NOTE
LVT1542-004A[J_E_EV]_Eng.book Page 8 Thursday, February 2, 2006 4:36 PM