JVC LVT2007-001D - Manual (Page 21)

21
Installation and
Setup
[LOCK] Menu (Parental Control)
Use the v / V / b / B buttons to select [LOCK] set-
tings in the [Setup] menu.
The [LOCK] settings affect only BD and DVD play-
back. Set the password and have to input it to vali-
date the [LOCK] settings.
Password
You can create, change or delete the password.
1. Select [Password] option on the [LOCK] menu
then press B.
2. Use number buttons on the remote control to
input the 4-digit password.
To create new password, press ENTER when the
[New] option is highlighted. Input new password
and press ENTER. Enter it again and press
ENTER to verify.
To change the password, press ENTER when the
[Change] option is highlighted, then input old
password and press ENTER. Input new password
and press ENTER. Enter it again and press
ENTER to verify.
To delete the password, select [Delete] option
then press ENTER, then input old password and
press ENTER. The password is deleted.
Tip:
If you make a mistake before pressing ENTER,
press b
b to delete a number one by one.
If you forget your password
If you forget your password, you can clear it using
the following steps:
1. Remove any disc that might be in the player.
2. Select [LOCK] t [Password] option in the
[Setup] menu.
3. Use Number buttons to enter the 6-digit number
“210499”.
The password is cleared.
Rating
Blocks playback of rated disc based on their con-
tent. (Not all discs are rated.)
1. Select [Rating] on the [LOCK] menu then
press B.
2. To access this option, you must input the pass-
word you have created. If you have not yet
entered password, you will be prompted to do so.
Input a password and press ENTER. Enter it
again and press ENTER to verify. If you make a
mistake before pressing ENTER, press b
b to
delete a number one by one.
3. Select a rating from 1 to 8 using the v / V but-
tons.
[Rating 1-8] – Rating one (1) has the most
restrictions and rating eight (8) is the least
restrictive.
[Unlock] – If you select unlock, parental control
is not active and the disc plays in full.
4. Press ENTER to confirm your rating selection.
BD Age
Set an age limit for BD-ROM viewing.
1. Select [BD Age] on the [LOCK] menu then
press B.
2. Follow step 2 as shown above (Rating).
3. Use number buttons to input an age limit for
BD-ROM viewing.
[255] – All BD-ROM can be played.
[0-254] – Prohibits play of BD-ROM with corre-
sponding ratings recorded on them.
4. Press ENTER to confirm your selection.
Area Code
Enter the code of the area whose standards were
used to rate the DVD video disc, based on the list
on page 33.
1. Select [Area Code] on the [LOCK] menu then
press B.
2. Follow step 2 as shown above (Rating).
3. Select the first character using v / V buttons
then press ENTER.
4. Select the second character using v / V buttons
then press ENTER to confirm your selection.
BD
DVD