Jenn-Air 720-0511 - Manual (Page 17)

15
LIGHTING ILLUSTRATIONS
MAIN BURNER LIGHTING ROTISSERIE BURNER & SEARING
SIDE BURNER LIGHTING
1. Open the top cover or lid. 1. Push and turn rear burner slowly to “INGITE / ON”
setting; you should hear a “clicking sound if the
electronic ignition system is working properly. The
burner should ignite within 4 seconds (if burner
does not ignite follow match lighting instructions on
page 18).
2. Turn the main burner control knobs to the
“IGNITE / HI” setting. Push the control
knob in until the burner ignites; you should
hear a “clicking” sound if the electronic
ignition system is working properly. The
burner should ignite within 4 seconds (if
burner does not ignite follow match lighting
instructions on page 16).
3. Once the burner ignites, adjust the
temperature level as desired.
2. Push and turn searing side burner knob to
“IGNITE / HI” setting; you should hear a
“clicking sound if the electronic ignition system
is working properly. The burner should ignite
within 4 seconds (if burner does not ignite follow
match lighting instructions on page 17).