Jenn-Air 720-0511 - Manual (Page 18)

16
TO MATCH LIGHT THE GRILL
If the burner will not light after several attempts using the control knobs, the burner may be lit with
a match.
Main Burner
1. If you have already attempted to light the burner with the igniter, allow 5 minutes for any
accumulated gas to dissipate.
2. Insert a match into the lighting rod. Ignite the match and insert through the cooking grids to the
burner.
3. Press the control knob and rotate left to the “IGNITE/HI” setting, continue to press the knob
until the burner ignites. The burner should light immediately.
4. If the burner does not light within 4 seconds turn the knob to the “OFF” position, wait 5
minutes and try again.
WARNING
When lighting, keep your face and hands as far
away from the grill as possible.
CAUTION
When using a match to light the grill make sure
to use the attached lighting rod.
Lighting Rod