Jenn-Air 720-0511 - Manual (Page 9)

7
Y
screws from the side of the shelf.
s in the side
rews and tighten.
. Insert the battery into the housing with the positive (+) terminal facing outward.
. Replace the ignition button
SIDE SHELF HANDLE ASSEMBL
Estimated Assembly Time: Approximately 5-7 minutes
Required Tools: Phillips Screwdriver (not included)
1. Remove the four side shelf handle
2. Align the hole
3. Insert the sc
shelf handle with the holes in the side shelf.
800 700 600 500 400 300 200 100
BATTERY INSTALLATION
1. Remove the ignition button housing.
2
3 housing after the battery has been installed.
800 7 00 600 500 400 300 200 100