Check, cancel and change programmes, Pg. 34) – JVC DR-MV5BEK User Manual

Page 34

Advertising
background image

Filename [MV5SEK_08Basic TimerDub.fm]

Masterpage:Left+

34

EN

TIMER RECORDING

Page 34Wednesday, 31 August 2005 19:58

Check, Cancel And Change Programmes

1

When the DVD timer indicator lights on the front display

panel
Press TIMER #, then press 1.

When “

” lights on the front display panel and the DVD

timer indicator also lights up on the front display panel.
Press 1.
When “SAT #” lights on the front display panel
Press SAT #, then press 1.

2

Press PROG to access the Programme Check screen, then

press rt w e to select “VHS” or “DVD”.

● To return to the previous screen after you check the programme,

press PROG again.

To cancel the programme
Press rt to select a programme to be cancelled, then press
CANCEL.

3

Press rt to select the programme, then press ENTER. The

programme screen appears.

4

Change the settings of the desired recording options as

required.

● Refer to steps 5 10 in “Manual Timer Programming” (

੬ pg. 31).

5

Press PROG to complete timer correction. The normal screen

resumes.

6

For VIDEO Plus+, Manual or On-Disc Timer Programming

(DVD deck only)
Press TIMER #.
For Automatic Satellite Programme Recording
Press SAT # for 2 seconds or more.

● The DVD timer indicator also lights up on the front display panel and

the VHS deck is automatically selected. When the VHS deck is in
timer standby mode, the unit is automatically turned off.

NOTE:
When you check, cancel and change a On-Disc Timer Programming,
be sure to insert the On-Disc Timer programmed disc.

rtwe

ENTER

VHS

PROG

TIMER
SAT

DVD

CANCEL

Programme’s information on the front display panel
You can check the details of the programmes on the front display
panel. However, it is not possible to cancel or change the
programme’s setting.
A Press PROG.

● “NEW PROG” or “P-1” (if 8 programmes have already been set)

appears.

B Press rt until the desired programme number (“P-1” to “P-
8”) appears, then press ENTER.
C Press e.

● Each time you press e, the indication changes as follows (the

settings in parentheses are examples):
Date (“DATE 08.03SU”) ] Start time (“ON 11:00”) ] Stop time
(“OFF 11:30”) ] Channel (“PR 1”) ] Weekly/Daily (“MO-FR
DAILY”) ] Programme number (“P-1”) and recording mode (“SP”)
] (Back to the beginning)

D Press PROG to complete checking.

● The normal display resumes.

MV5SEK_00.book Page 34 Wednesday, August 31, 2005 7:58 PM

Advertising
This manual is related to the following products: