3 pillow care, 4 cleaning the spa interior, 5 vinyl cover care and maintenance – Jacuzzi J - 315 User Manual

Page 38

Advertising
background image

34

J-300

12.3 pillow Care

Remove and clean the headrest pillows as needed with soapy water

using a cloth or soft-bristle brush. Always remove the pillows when

adding chemical shock treatment to the spa water. When the sanitizer

reading is below 4.0 ppm, pillows can be reinstalled.

CauTIon: Never attempt to remove the pillows by pulling on

the complete assembly! The pillows utilize a bolt-on design

that prohibits removal without tools.

!

To remove pillows:

1. Grasp pillow insert (A) with finger tips and

gently pry outward from pillow base (C).

2. Use a standard screwdriver to loosen and

remove mounting bolts (B) from pillow

base.

3. Assemble in reverse order after cleaning.

DO NOT overtighten pillow mounting

bolts!

12.4 Cleaning The spa Interior

To preserve the sheen of your spa’s surface, it is crucial that you avoid

using abrasive cleaners or cleaners which have adverse chemical effect

on the surface. If you are not certain as to the suitability of a particular

cleanser, consult your authorized Jacuzzi dealer. Regardless of the

cleanser used, use extreme care to assure that no soap residue is left on

the surface. This could cause severe sudsing when the spa is refilled.
12.5 vinyl Cover Care and maintenance

Your Jacuzzi cover has a vinyl encasement. This vinyl encasement is

attractive and durable. Monthly cleaning and conditioning is strongly

recommended to maintain and increase the longevity of your cover.

A.

To Clean and Condition the vinyl Cover

1. Use a garden hose to loosen debris and dirt.

2. Using a large sponge or a soft bristle brush, use diluted or mild soap

and scrub the vinyl top. Rinse clean and do not allow soap to dry on

cover. Do not use soap on the underside of the cover.

3. Please check with your Jacuzzi Dealer for recommended cover

care and conditioning products. Condition using non-petroleum

based conditioners to keep the vinyl supple and threads/stitching

from drying out. Do not use solvents, abrasive cleaners or strong

detergents. Do not use products that contain silicone or alcohol.

Advertising
This manual is related to the following products: