Jonsered BC2053 - Manual (Page 2)

2 – English
KEY T O SYMBOLS
Symbols
W ARNING! A clearing saw, brushcutter or
trimmer can be dangerous if used
incorrectly or carelessly, and can cause
serious or fatal injury to the operator or
others. It is extremely important that you
read and understand the contents of this
operator’s manual.
Please read the operator’s manual
carefully and make sure you understand
the instructions before using the machine.
Always wear:
• A protective helmet where there is a risk
of falling objects
• Approved hearing protection
• Approved eye protection
Max. speed of output shaft, rpm
This product is in accordance with
applicable EC directives.
W atch out for thrown objects and
ricochets.
The oper ator of the machine must ensure,
while working, that no persons or animals
come closer than 15 metres.
Machines fitted with saw blades or grass
blades can be thrown violently to the side
when the blade comes into contact with a
fixed object. This is called blade thrust. The
blade is capable of amputating an arm or
leg. Always keep people and animals at
least 15 metres from the machine.
Arrows which show limits for handle
positioning.
Always wear approved protective gloves.
Wear sturdy, non-slip boots.
Only use non-metallic, flexible cutting
attachments, i.e. trimmer heads with
trimmer cord.
Noise emission to the environment
according to the European Community’s
Directive. The machine’s emission is
specified in chapter Technical data and on
label.
Other symbols/decals on the mac hine refer to
special certification requirements for certain markets.
Switch off the engine b y moving the stop
switch to the STOP position before carrying
out any checks or maintenance.
Alw ays wear approved protective gloves.
Regular cleaning is required.
Visual chec k.
Appro ved eye protection must always be
used. 50FT
15 m
50FT
15 m