Sony Qualia 006 - Manual (Page 48)

Setting Up the SXRD Projection TV
46
SXRD
2-584-141-12(1)
Satellite Receiver
with a VCR and
Cable Disconnect all power sources before making any connections.
1
Connect the CATV cable to the single (input) jack of the splitter.
2
Using a coaxial cable, connect one of the splitter’s two output jacks to
the SXRD projection TV’s CABLE jack.
3
Using a coaxial cable, connect the splitter’s other output jack to the
VCR’s VHF/UHF IN jack.
4
Connect the satellite antenna cable to the satellite receiver’s
SATELLITE IN jack.
5
Using A/V and S VIDEO cables, connect the satellite receiver’s AUDIO
and S VIDEO OUT jacks to the VCR’s AUDIO and S VIDEO IN jacks.
6
Using A/V and S VIDEO cables, connect the VCR’s AUDIO and S
VIDEO OUT jacks to the SXRD projection TV’s AUDIO and S VIDEO
IN jacks.
7
Run Auto Program, as described in “Setting Up the SXRD Projection
TV Channel List” on page 60.