Setting the transmission channel, Selecting the group/ channel, Setting the transmission channel 25 – Sony 3-873-945-12 (1) User Manual

Page 25: Selecting the group/channel

Advertising
background image

25

Setting the transmission channel

Be sure to check the expiration date printed
date on the new batteries before using them.

The indication is based on the use of new
LR6 (size AA) Sony Alkaline batteries. An
incorrect indication may result when a
different kind of batteries, a different brand
of batteries or old batteries are used. If you
plan to use the transmitter for a long period
of time, it is recommended that you replace
the batteries with brand new ones.

Setting the
transmission
channel

The transmitter provides groups of
interference-free channels. When using
multiple microphones and transmitters at
the same time (simultaneous multi-channel
operations) within the same area, selecting
the same group and using a channel within
that group can prevent signal interference.
To set the transmission channel on the
transmitter, first you select the group and
channel using the RF indicator and
scanning functions on the receiver. Next
you set the group and channel parameters to
match the setting on the receiver.

Selecting the group/
channel

• Before doing this procedure, use the

BAND function (see page 33) to set the
transmitter to the bandwidth of the
receiver you are using.

• The setting for this function cannot be

changed during actual signal
transmission.

Set the transmitter group (GP) and channel
(CH) as follows:

For details on groups and channels, refer to “Sony
Digital Wireless Microphone System Frequency
Lists” on the supplied CD-ROM.

For details on menu operation, see “Basic menu
operations” on page 31.

Note

Notes

Advertising
This manual is related to the following products: