Samsung YP-MT6 - Manual (Page 22)

43
Setting the EQ mode Setting the EQ mode
42
1
Press and hold the "M" button. Select Settings → My Sound.
2
In My Sound, use , to move to the sound mode you want and press
the
“M” button. ● Use , to select the SRS function you want and
then press the
“M” button.
● The SRS function is applied only when you select the
SRS, TruBass or WOW in the Preset EQ.
● Use , to move to the sound mode you want and then press the “M” button.
● SRS → TruBass → WOW → Normal → Classic → Jazz → Rock → User
● Select User EQ Set to set the EQ as desired.
● SRS : You will hear 3D Stereo sound.
Use , to adjust SRS from 0 to 10.
● TruBass : This is a bass boost feature that adds fullness
to the sound.
Use , to adjust TruBass from 0 to 10.
● Focus : You can enjoy clearer tone during playback.
Use , to set Focus and then
press the
“M” button.
The chosen frequency band will be boosted.
High → Middle → Low
● Optimum : Optimize the SRS function according to the device
connected to the main unit.
Use , to move to the connected device and
then press the
“M” button.
Earphone → Headphone → Speaker →
Carpack(Car Cassette Adapter)
I Preset EQ
I WOW Set
● Use , to select Bass Booster On or Off and then
press the
“M” button.
● Bass Booster function is applied only when you select
Normal, Classic, Jazz or Rock in the Preset EQ.
● On: When the music is played back, the bass is
enhanced in the preset sound.
● Off: Music is played back in the preset sound.
I Bass Booster