Sony DVP-NS501P - Manual (Page 20)

20
Step 4: Connecting the Audio Cords
Refer to the chart below to select the connection that best suits your system. Be sure to also read
the instructions for the components you wish to connect.
Select a connection
Select one of the following connections, through .
z Hint
If you connect an AV amplifier (receiver) that
conforms to the 96 kHz sampling frequency, use
connection .
* Manufactured under license from Dolby
Laboratories. “Dolby,” “Pro Logic,” and the
double-D symbol are trademarks of Dolby
Laboratories.
** “DTS” and “DTS Digital Out” are trademarks
of Digital Theater Systems, Inc.
Components to be connected Connection Your setup (example)
TV (page 21)
Stereo amplifier (receiver) and two speakers
or
MD deck/DAT deck (page 22)
AV amplifier (receiver) having a Dolby *
Surround (Pro Logic) decoder and 3 to 6
speakers
(page 23)
AV amplifier (receiver) with digital input jacks
having a Dolby Digital or DTS** decoder and 6
speakers (page 24)
A D
A
B
C
D
D