Samsung 460UT-2 - Manual (Page 27)

Note
Select HDMI2 (only with a 460UT-2, 460UT-B model) or HDMI1 as an input
source when connected to the PC via an HDMI cable.
To obtain normal picture and audio from the PC, HDMI2 (only with a
460UT-2, 460UT-B model) or HDMI1 must be selected before PC is se-
lected in Edit Name.
To enable audio when DVI Device is selected, be sure to establish the
connection using step (
).
Connect the Audio cable for your LCD Display to the AUDIO port on the
back of the LCD Display.
Connect the power cord for your LCD Display to the POWER port on the
back of the LCD Display. Turn on the power switch.
Note
Contact a local SAMSUNG Electronics Service Center to buy optional items.
Connecting to Other devices
Note
• AV input devices such as DVD players, VCRs or camcorders as well as your computer
can be connected to the LCD Display. For detailed information on connecting AV input
devices, refer to the contents under Adjusting Your LCD Display.
• The LCD Display 's configuration at the back may vary slightly depending on the LCD
Display model.
Connecting an External Monitor
Connections
26