Audio setup – Sony BDP-S300 User Manual

Page 47

Advertising
background image

47

C

hanging th

e Initial

Sett

ings

Audio Setup

Underlined items are the default settings. Since many factors
affect the type of audio output, see also “About the audio output
signals” on page 48
.

Dolby Digital

Dolby Digital
– Select this when connecting to a device with a built-in Dolby Digital decoder.

Downmix PCM
– Converts to output Linear PCM signals. Select this when connecting to a device

without a built-in Dolby Digital decoder.

– Select the audio signals output when playing

Dolby Digital discs. This setting affects the
output from the DIGITAL OUT (COAXIAL
or OPTICAL) jack.

DTS

DTS
– Select this when connecting to a device with a built-in DTS decoder.

Downmix PCM
– Converts to output Linear PCM signals. Select this when connecting to a device

without a built-in DTS decoder.

– Select the audio signals output when playing

DTS discs. This setting affects the output
from the DIGITAL OUT (COAXIAL or
OPTICAL) jack.

DTS Downmix

Stereo
– Downmixes multi-channel audio signals for two channel stereo.

Lt/Rt
– Allows you to hear surround sound when the connected device has a built-in Dolby

Pro Logic decoder.

– Select the type of 2-channel signals when

down-mixed from multi-channel DTS
sources (effective for audio connections
when “DTS” is set to “Downmix PCM”).

Audio (HDMI)

Auto
– Normally, select this. Outputs audio signals according to the status of the connected

HDMI device.

PCM
– Converts all audio signals to Linear PCM.

– Select the output method from the HDMI

OUT jack.

,continued

Advertising
This manual is related to the following products: