Sony SLV-EZ77AS - Manual (Page 17)

17 Getting Started
Getting Started
Presetting channels
If you can receive no channels or only a few channels after performing the
EASY G-CODE SET UP function (page 15), preset all receivable channels
automatically using the One Touch Tuning function or the TUNER PRESET
menu.
If some channels could not be preset automatically when using the EASY
G-CODE SET UP function, One Touch Tuning function or TUNER PRESET
menu, preset them manually; if there are any unwanted channels among the
preset ones, you can disable the channels.
Presetting all receivable
channels using the One
Touch Tuning function
1
Press and hold ONE TOUCH TUNING on the VCR for more than
three seconds.
2
(For SLV-EZ66AZ only)
1 Press PROGRAM +/– on the VCR so that the indicator for your
country (AUS or NZ) appears in the display window.
2 Press ONE TOUCH TUNING.
The VCR starts presetting the channels.
The WAIT indicator goes off when all the receivable channels are
preset.
To check if the channels are preset correctly
Set the TV to the video channel and press PROGRAM +/– on the VCR. If the
TV screen changes to a different programme each time you press
PROGRAM +/–, the channels are preset correctly.
Tip
• To stop the One Touch Tuning function, press ONE TOUCH TUNING or p STOP
on the VCR during the setting.
ONE TOUCH
TUNING
continued
ONE TOUCH
TUNING
SP
APC
SP
APC
PROGRAM
+ –
ONE TOUCH
TUNING
PROGRAM +/–