Sony SLV-EZ77AS - Manual (Page 59)

Additional Operations
59
Adjusting the picture
Adjusting the tracking
Although the VCR automatically adjusts the tracking when playing a tape
(the
indicator flashes in the display window, then goes off), distortion
may occur if the tape was recorded in poor condition. If so, manually adjust
the tracking.
Press TRACKING +/– buttons on the VCR to
display the tracking meter. The distortion should
disappear as you press one of the two buttons.
(The
indicator lights up.) To resume automatic
tracking adjustment, eject the tape and reinsert it.
Tracking meter
About the R 2 (Reality Regenerator) function
(SLV-EZ77AS/EZ77NZ only)
The R 2 function automatically
adjusts the picture to the most
suitable quality during playback.
When playback starts, the R 2
function activates and the R 2
button lights up.
Each pressing of the button changes the effect and indication in the display
window as follows:
R 2
SOFT REAL (status of playback started) DYNA (dynamic)
continued
NORMAL TRACKING