Sony SLV-EZ77AS - Manual (Page 62)

62
Editing
Connecting to a VCR or stereo system
How to connect to record on this VCR
How to connect to a stereo system
Connect LINE-2 IN AUDIO on this VCR to the audio output jacks on the
stereo system, using the RK-C510HG audio cable (not supplied).
Tips
• If the other VCR is a monaural type and connected to this VCR’s LINE-2 IN jacks,
connect the audio plug to the AUDIO L (white) jack. The sound is recorded on both
right and left channels. When connecting to the AUDIO R (red) jack, the sound is
recorded only on the right channel.
• You can also use the LINE-1 IN (SLV-EZ77AS/EZ77NZ: SAT IN/STB IN) or LINE-3
IN (SLV-EZ77AS/EZ77NZ only) jacks instead. If the other VCR is a monaural type,
the sound is recorded only on the channel whose jack is connected to the audio
plug. To record on both right and left channels, connect the audio plugs to the
AUDIO R/L jacks using a VMC-910HG audio/video cable (not supplied).
Notes
• If you connect this VCR to both the LINE IN and LINE OUT jacks of the other VCR,
select the input correctly to prevent a humming noise.
• Make sure you connect the plugs to the jacks of the same colour.
This VCR (Recorder)
TV
Other VCR (Player)
: Signal flow
LINE OUT
Editing
VMC-810HG audio/video cable (not supplied)
LINE-2 IN