Connecting a vcr – Samsung Tantus PCK 6115R User Manual

Page 18

Advertising
background image

2.4

C

HAPTER

T

WO

: I

NSTALLATION

4

Connect a coaxial cable
between the ANTENNA
OUT terminal on the
cable box and the B–IN
terminal on the A/B
switch.

5

Connect another cable
between the other OUT
terminal on the splitter
and the A–IN terminal
on the RF (A/B) switch.

6

Connect the last coaxial
cable between the OUT
terminal on the RF (A/B)
switch and the VHF/UHF
terminal on the rear of
the TV.

I

N S TA L L AT I O N

Connecting a VCR

These instructions assume that you have already connected your TV to an antenna or a cable
TV system (according to the instructions on pages 2.1-2.3). Skip step 1 if you have not yet
connected to an antenna or a cable system.

After you’ve made this connection, set the A/B switch to the “A” position for normal viewing.
Set the A/B switch to the “B” position to view scrambled channels. (When you set the A/B
switch to “B,” you will need to tune your TV to the cable box’s output channel, which is usu-
ally channel 3 or 4.)

1

Unplug the cable or
antenna from the back
of the TV.

2

Connect the cable or
antenna to the
ANTENNA IN terminal
on the back of the VCR.

00583F(E)-CHAPTER 2 7/19/05 2:30 PM Page 4

Advertising
This manual is related to the following products: