Storing channels in memory (automatic method) – Samsung Tantus PCK 6115R User Manual

Page 28

Advertising
background image

3

Press VOL + again.
The TV will begin
memorizing all of the
available channels.

4

After all the available
channels are stored, the
Auto program menu
reappears. Press Menu
three times to exit.

3.6

C

HAPTER

T

HREE

: TV O

PERATION

O

P E R AT I O N

Storing Channels in Memory (Automatic Method)

The TV automatically cycles

through all of the available channels
and stores them in memory. This
takes about one to two minutes.

Press VOL+ at any time to interrupt
the memorization process and return
to the Setup menu.

2

Press VOL + while
“Channel set up” is high-
lighted. A new sub-menu
will appear, and “Auto
program” will be
highlighted.

1

First, select the correct
signal source (ANT, STD,
HRC, IRC). See steps 1~4
on previous page.

Press MENU, then press
CH

▼ twice to highlight

“SET UP.”

Press VOL + to access
the SETUP sub-menu.
“Channel set up” will be
highlighted.

Note: Channel auto program does not function when the
V-chip is active.

00583F(E)-CHAPTER 3 7/19/05 2:32 PM Page 6

Advertising
This manual is related to the following products: