Samsung DynaFlat TX R2765 - Manual (Page 27)

O P E R AT I O N
27
3
Press the ENTER button.
The TV will begin
memorizing all of the avail-
able channels.
After all the available
channels are stored, the
channel menu reappears.
Press the EXIT button to
exit the menu.
Storing Channels in Memory (Automatic Method)
▼
The TV automatically cycles
through all of the available channels
and stores them in memory.
This takes about one to two minutes.
2
Press the ▲ or ▼ button
to select “Auto Program”.
1
First, select the correct signal
source (Air, STD, HRC, IRC).
See steps 1~3 on previous page.
Move Adjust Return
Channel
Auto program ˆˆ
Add/Delete ˆˆ
Fine tune : 00
Air/CATV ˇˇ Air ˆˆ
Name : - - - -
Move Enter Return
Channel
Auto program ˆˆ
Add/Delete ˆˆ
Fine tune : 00
Air/CATV : Air
Name : - - - -
Auto program
Air 3
Exit
▼
Press the MENU button at any
time to interrupt the memorization
process and return to the channel
menu.