SATO XL400/410 - Manual (Page 72)

72 SATO RISC Printers
2. Command Codes Programming Manual
Off-Line/Pause
Command Structure:
<ESC>@,nn...n
nn...n:
Optional message to be displayed on the LCD.
Maximum of 32 characters
Example: See above
Placement: Anywhere in the print job between <ESC>A and
<ESC>Z
Default: None
Function:
To specify the printer to come to an off-line state. When used within a
print job, the printer goes off-line after finishing the print job.
Input:
<ESC>A
<ESC>@,Load Blue Labels and place printer On-Line
. . . Job . . .
<ESC>Z
Output:
There is no printer output for this command. The printer is placed in
the Off-Line mode as soon as the current print job is finished.
Note:
1. You must press the LINE key on the front panel to return the
printer to an On-Line status.
2. Remember, when using this command, that if the print job spec-
ifies <ESC>Q10, all ten labels will print before the printer will go
off-line.