Samsung SP-U300M - Manual (Page 13)

Installation and Connection 2-3-1
The projection distance is the horizontal distance between the projector and the screen.
2. When your U300 projector is installed in a location where the projection distance matches the screen diagonal length , you will
enjoy a clear screen with no distortions (keystone).
2-3-1 Connecting with a PC
1. Connect [PC IN] port on the rear side of the projector to the monitor output port of the PC using a PC video cable.
2. When connections are all completed, connect both power cords of the projector and the PC.
3. Connect the [VIDEO/PC AUDIO IN] input port of the projector to the speaker output ports of the PC using an audio cable.
This product supports plug and play and therefore, if you use Windows XP, you do not need to setup the driver on your PC.
Using the Projector
1. Turn on the projector and press the [SOURCE] button to select <PC>.
If the <PC> Mode is not available, make sure the PC video cable is properly connected.
2. Turn on the PC and set the PC Environment when necessary.
3. Adjust the screen.(Auto Adjustment)
2-3-2 Setting up the PC Environment
Check the following items before connecting your PC to your projector.
70” 2959mm / 116.5
inches 1422mm / 56.0
inches 1067mm / 42.0
inches 1778mm / 70.0
inches
80” 3386mm / 133.3
inches 1626mm / 64.0
inches 1219mm / 48.0
inches 2032mm / 80.0
inches
90” 3812mm / 150.0
inches 1829mm / 72.0
inches 1372mm / 54.0
inches 2286mm / 90.0
inches
100” 4238mm / 166.9
inches 2032mm / 80.0
inches 1524mm / 60.0
inches 2540mm / 100.0
inches
SCREEN SIZE
Projection
Range(D)
Screen width(A)
SCREEN
HEIGHT(B)
SCREEN
DIAGONAL
LENGTH(C)