Sharp XG-PH70X - Manual (Page 92)

-90
Service Mode
Only the service centers use the menu. Do not
use the menu.
Example: “Options (2)” screen menu
Description
Factory default setting:
192.168.150.002
Enter an IP address appropriate for the
network.
Factory default setting:
255.255.255.000
Set the subnet mask to the same as that
of the computer and equipment on the
network.
Factory default setting:
000. 000. 000. 000
* When not in use, set to:
“000. 000. 000. 000”.
Selectable items
IP Address
Subnet Mask
Gateway
Description of TCP/IP
Note
• Before setting “TCP/IP”, select “OFF” for “DHCP
Client”.
• Confirm the existing network’s segment (IP ad-
dress group) to avoid setting an IP address that
duplicates the IP addresses of other network
equipment or computers. If “192.168.150.002”
is not used in a network with an IP address of
“192.168.150.XXX”, you don’t have to change
the projector IP address.
• For details about each setting, consult your net-
work administrator.
Helpful Functions Set during Installation (“Options (2)” menu)
4
Enter “Gateway” using '
' ' ' ', " " " " ", | | | | | and
\, then press
.