Sony SAT-B50 - Manual (Page 69)

69
O
the
r
Inf
o
rma
tio
n
SAT-A50 Back Panel
1 ACCESS CARD slot
Do not remove the Access Card unless instructed
to do so by your service provider.
2 SATELLITE IN jack
Inputs satellite signals from your Satellite Dish
Antenna using RG-6 coaxial cable.
3 RF REMOTE jack
Inputs remote control signals using the RF
Antenna.
4 CH3/CH4 switch
When you use an RF connection (VHF(SAT)/
UHF OUT jack), this setting determines the TV
channel on which programs from the Digital
Satellite Receiver can be viewed.
5 VHF/UHF IN jack
Inputs off-air signals from your local TV off-air
antenna using coaxial cable. Some antennas
require an adapter (not supplied).
6 AC IN jack
Inputs AC power from a power outlet using the
AC Power Cord.
7 TEL LINE jack
Connects the Digital Satellite Receiver to a
telephone outlet using a telephone line cable.
8 VHF(SAT)/UHF OUT jack
Outputs audio and video signals to the VHF/
UHF input on your TV or VCR using coaxial
cable.
9 A/V OUTPUT jacks
Output audio and video signals to your TV and
other audio/video equipment using A/V cables.
q; LOW SPEED DATA
For future application.
qa VCR CONTROL jack
Allows the VCR Controller to control a VCR and/
or cable box. Also allows connection of a
monaural cable for use with Sony SmartFile
VCRs.
qs DIGITAL OUT (OPTICAL)
Outputs digital audio signals to the digital optical
input of your audio receiver.
ACCESS CARD
LOW SPEED DATA
VCR CONTROL
DIGITAL
OUT
(OPTICAL)
SATELLITE IN
RF REMOTE
R L(MONO)
VIDEO OUT
AUDIO VIDEO
S VIDEO
CH3
CH4
VHF/UHF IN
VHF(SAT)/UHF
OUT TEL LINE
AC IN~
1
2
qs
1 3 4 5
qa q; 9 8 7 6
2