Sony SAT-B50 - Manual (Page 8)

8
The SATELLITE IN jack sends power to, and receives satellite signals
from, the Satellite Dish Antenna. The telephone line connection
periodically sends information about your receiver and Access Card to
your service provider.
ACCESS CARD
LOW SPEED DATA
VCR CONTROL
DIGITAL
OUT
(OPTICAL)
SATELLITE IN
RF REMOTE
R L(MONO)
VIDEO OUT
AUDIO VIDEO
S VIDEO
CH3
CH4
VHF/UHF IN
VHF(SAT)/UHF
OUT TEL LINE
AC IN~
1
2
Digital Satellite Receiver
Connect the SATELLITE IN
jack to your Satellite Dish
Antenna using RG-6
coaxial cable.
RG-6 Coaxial Cable from
Satellite Dish Antenna Telephone Cord
Connect the TEL LINE
jack to a telephone
line wall jack using
the supplied
telephone cord.
Notes
• The SAT-A50 model is shown.
Connections for the SAT-B50
model are the same.
• Your Satellite Dish Antenna
Installation/Operating
Instructions provides detailed
instructions on how to install
RG-6 coaxial cable from your
Satellite Dish Antenna.
CAUTION
Only connect your authorized
Satellite Dish Antenna to the
SATELLITE IN jack as described
in the Installation/Operating
Instructions.
Connecting any other equipment
to this jack could result in damage
to the equipment and/or receiver.
1
1 2
2
Step 2: Connecting the Satellite Dish Antenna
and Telephone Line