Basic connections (connecting cable tv or antenna), Connecting directly to cable or an antenna, Cable and antenna – Sony KP-46WT510 User Manual

Page 19: Basic connections (connecting cable tv or, Antenna)

Advertising
background image

Installing and Connecting the Projection TV

16

Model name1[KP-46WT510] Model name2[KP-51WS510] Model name3[KP-57WS510] Model name4[KP-65WS510]

[4-094-605-12]

Basic Connections (Connecting Cable TV or Antenna)

Connecting Directly
to Cable or an
Antenna

The connection you choose depends on the cable found in your home. Newer
homes are equipped with standard coaxial cable (see

A

); older homes

probably have 300-ohm twin lead cable (see

B

); other homes may contain

both (see

C

).

A VHF Only or VHF/UHF or Cable

B VHF Only or UHF Only or VHF/UHF

C VHF and UHF

Cable and Antenna

If your cable provider does not feature local channels, you may find this
setup convenient.

Select CABLE or antenna (ANT) mode by pressing

ANT

on the remote

control.

75-ohm coaxial
cable

Rear of projection TV

VHF/UHF

Rear of projection TV

Antenna connector

300-ohm twin lead cable

VHF/UHF

Rear of projection TV

75-ohm coaxial cable

VHF/UHF

U/V Splitter
(not supplied)

300-ohm twin lead cable

To receive channels with an antenna, you need to turn your Cable to Off
(see page 55) and perform the Auto Program function (see page 56).

CATV cable

Rear of projection TV

TO

CONVERTER

(No connection to
TO CONVERTER)

VHF/UHF

Antenna cable

AUX

Advertising
This manual is related to the following products: