Connecting a digital tv receiver – Sony KP-46WT510 User Manual

Page 31

Advertising
background image

Installing and Connecting the Projection TV

28

Model name1[KP-46WT510] Model name2[KP-51WS510] Model name3[KP-57WS510] Model name4[KP-65WS510]

[4-094-605-12]

Connecting a Digital TV Receiver

Disconnect all power sources before making any connections.

1

Using three separate component video cables, connect the Digital TV
Set-top box’s Y, P

B

and P

R

jacks to the projection TV.

2

Using an audio cable, connect the Digital TV Set-top box’s Audio OUT
jacks to the projection TV’s AUDIO IN jacks.

The Y, P

B

and P

R

jacks do not provide audio, so audio cables must

be connected to provide sound.

Component video connection is necessary to view 480p, 720p, and
1080i formats. You may also use the S VIDEO or Composite Video
connections, however, component video (Y, P

B

, P

R

) will provide the

best picture quality for all format types.

Be sure to read the

Set-top box manual.

Some Digital TV

Receivers are equipped
with a DVI connection.
Refer to your Digital TV
Receiver manual for
setup instructions using
this connection.

z

z

VMC-10HG (not supplied)

Digital TV Set-top box

RK-74A (not supplied)

AUDIO-R (red)

AUDIO-L (white)

Rear of projection TV

P

R

P

B

Y

You cannot record the signal from any equipment connected into the
Y, P

B

and P

R

connectors.

This projection TV is not compatible with digital TV receivers
configured with RGB or VGA output connectors.

The DVI connection is compliant with the EIA-861 standard and is
not intended for use with personal computers.

Advertising
This manual is related to the following products: