Samsung YH-925 - Manual (Page 30)

59
Backlight Settings
ENG
Recording Settings
58
1
In the Menu, use the SCROLL UP/SCROLL DOWN buttons to select
Settings, and then press the SEL button.
2
Use the SCROLL UP/SCROLL DOWN buttons to select Record Settings,
and then press the SEL button.
3
Use the SCROLL UP/SCROLL DOWN buttons to select Sampling Rate and Bit Rate,
and then briefly press the SEL button to make the desired recording setting.
● Complete the desired setting, and then press the MENU button to go to the main menu.
● Sampling Rate: Each time the Select button is pressed, the selection toggles
between 32KHz and 44KHz.
● Bit Rate: Each time the Select button is pressed, the selection changes as follows:
96 ➔ 128 ➔ 160Kbps.
● Selecting a higher bit rate results in better quality sound, but uses more memory space.
N N N N o o o o tt tt e e e e
- Voice can be recorded only at 8KHz 32kbps.
✍
Settings
Record Settings
Repeat-Off
EQ-Off
Record Settings
SamplingRate - 44khz
Bit Rate - 128kbps
SRS Settings
Backlight-5sec
1
In the Menu, use the SCROLL UP/SCROLL DOWN buttons to select Settings,
and then press the SEL button.
2
Use the SCROLL UP/SCROLL DOWN buttons to select Backlight.
3
Press the SEL button until the desired Backlight
On-Time appears.
● Off, 3, 5, 10, 15, 30seconds and Always are available for
Backlight-On Time.
Settings
Record Settings
Repeat-Off
EQ-Off
SRS Settings
Backlight- 5sec
1
In the Menu, use the SCROLL UP/SCROLL DOWN buttons to select Settings,
and then press the SEL button.
2
Use the SCROLL UP/SCROLL DOWN buttons to select Contrast.
3
Press the SEL button until the desired screen
contrast appears.
● The setting range of the contrast, which adjusts the
contrast of the screen, is 0 to 6.
Settings
Backlight-5sec
EQ-Off
SRS Settings
Record Settings
Contrast- 3
Contrast Settings