Sennheiser W300 IEM - Manual (Page 12)

10
“MUTE” display
The “MUTE” display
ቨ
appears on the display panel when the RF signal of the
received transmitter is too weak.
“PILOT” display
The “PILOT” display
ቧ
appears on the display panel when the pilot tone
evaluation is activated (see “Activating/deactivating the pilot tone
evaluation (receiver only)” on page 32).
RF signal indication
The green LED (RF)
ᕤ
at the front of the receiver lights up when an RF signal
is being received.
However, the green LED (RF) does not light up when the audio output is
muted because
y the RF signal of the received transmitter is too weak,
y the transmitter is set to mono operation and the receiver’s pilot tone
evaluation is deactivated.
Display backlighting
After pressing a button, the display remains backlit for approx. 15 seconds.
ቨ
ቧ
¿
ew300_350_IEM_INT.book Seite 10 Freitag, 7. März 2008 8:55 08