Sony PEG-NX60 - Manual (Page 33)

33
Bas
ic
op
e
ra
tions
of your Sony
CLIÉ™ Han
d
h
e
ld
Camera (for PEG-NX70V only)
b
For details, refer to “Enjoying your CLIÉ Handheld” on page 55.
REC LED
b
For details, refer to the explanation of each application in “CLIÉ Application Manual”
on your computer.
HOLD Switch
Note
When you cannot turn on or operate your CLIÉ handheld, check if the HOLD switch is
not in the HOLD position.
If you try to turn on your CLIÉ handheld while the HOLD switch is in the HOLD
position, the POWER LED indicator blinks green three times.
You can take image files or movie
files.
Note
When the camera is not used, rotate the lens
part to the inward side of the CLIÉ
handheld until it clicks into place.
Lights when you are recording a
movie.
Protects your CLIÉ handheld from
accidental tapping on the screen or
pressure on the POWER button when
you are carrying your CLIÉ handheld.
If you slide this switch while the power
is on, the screen display turns off, even
during an operation.