Hdmi/dvi mode – Samsung 2263UW User Manual
Page 68
You can change the size of the screen displayed on your monitor.
•
Auto - The screen is displayed in accordance with the screen aspect ratio of the input signals.
•
Wide - A full screen is displayed regardless of the screen aspect ratio of the input signals.
Note
•
Signals not available in the standard mode table are not supported.
•
If the wide screen which is the optimal resolution for the monitor is set on your PC, this function
is not performed.
MENU → , →
→ , →
→ , → MENU
HDMI/DVI Mode
You can change the size of the screen displayed on your monitor.
•
4 : 3 - Sets the picture to 4:3 normal mode.
•
Wide - Enlarges the aspect ratio of the picture to fit the entire screen.
•
Just Scan - Use the function to see the full image without any cutoff when HDMI/DVI (720p/
1080i/1080p) signals are input.
Note
•
It can only be selected if an external input is connected to the HDMI terminal and the 'AV Mode'
is set to 'On'.
•
Signals not available in the standard mode table are not supported.
•
If the wide screen which is the optimal resolution for the monitor is set on your PC, this function
is not performed.
MENU → , →
→ , →
→ , → MENU
Adjusting the Monitor
67