To mount the sound bar speaker on the wall, Installing the sound bar speaker – Sharp Aquos TINS-E595WJQZ User Manual

Page 22

Advertising
background image

20

To mount the Sound Bar Speaker on the wall

Positioning the Speaker System

ε

Wall mount angle fixed on the wall

(Horizontal position)

Fix the pattern paper to the wall in horizontal
position as below.

29 mm

29 mm

44 mm

44 mm

509 mm

Pattern paper

Wall surface

Make a hole on the wall following the screw
point marks on the pattern paper by using a drill.

1-9/16" (40 mm)

3/8" (8-9 mm)

Wall surface

Fix a wall mount plug into the hole using a
hammer until it is flush with the wall surface.

1-9/16" (40 mm)

3/8" (8-9 mm)

Wall surface

Screw the wall mount angle to the wall as shown
in the illustration. (Total screw is 8 pieces)

Wall surface

Wall mount angle

Wall mount angle

(screws x 4)

(screws x 4)

Wall surface

Wall surface

Wall mount angle

NOTE

Make sure all screws are fully tighten. (screws are not
supplied)

1

2

3

4

ε

Installing the Sound Bar Speaker

Before installing the speaker, connect the speaker
connection cords to the speaker. (See pages 22-23.)

Align the wall mount slot at the speaker to the
wall mount angle.
Slot the speaker into the wall mount angle.
Fix them securely.

Wall surface

1
2

3

Advertising
This manual is related to the following products: