Samsung CSL2099DV - Manual (Page 23)

C HAPTER T HREE : TV O PERATION
3.5
O
P E R AT I O N
Changing Channels
Using the Channel Buttons
Directly Accessing Channels
Use the number buttons to quickly tune to any channel.
2
Press the ADD/ERASE button:
Repeatedly pressing this but-
ton will alternate between
“Added” and “Erased.”
1
Use the number buttons to
directly select the channel
that will be added or
erased.
Adding and Erasing Channels (Manual Method)
Using the Pre-CH Button to select the Previous Channel
▼
You can view any channel
(including an erased channel) by
using the number buttons on the
remote control.
Press the CH or CH
buttons to change chan-
nels.
Press the number buttons to
go directly to a channel.
For example, to select channel
27, press “2,” then “7.” The TV
will change channels when
you press the second number.
Press the PRE-CH button.
The TV will switch to the last
channel viewed.
▼
When you press the CH or CH
buttons, the TV changes channels in
sequence. You will see all the channels
that the TV has memorized. (The TV
must have memorized at least three
channels.) You will not see channels that
were either erased or not memorized.
▼
To quickly switch between two chan-
nels that are far apart, tune to one chan-
nel, then use the number button to select
the second channel. Then, use the Pre-
CH button to quickly alternate between
them.
When you use the number buttons, you can directly select channels that were either erased or
not memorized.
To select a channel over 100, press the +100 button. (For channel 122, press “+100,” then “2,”
then “2.”)
To change to single-digit channels (0–9) faster, press “0” before the
single digit. (For channel “4,” press “0,” then “4.”)
01640A(E)-CHAPTER 3 4/13/05 10:28 AM Page 5