Samsung CSL2099DV - Manual (Page 59)

C HAPTER F IVE : P LAYING A D ISC
5.13
P L AY I N G A D I S C
Changing the Camera Angle
When a DVD contains multiple angles of a particular scene, you can select the Angle
function.
Using the ANGLE button
Press the ANGLE button to see if an ANGLE ( ) mark is present at the upper right
hand corner of the screen.
2
Press the UP/DOWN ▲▼
buttons to select the
desired screen angle,then
press the ENTER button.
To turn off the display,
press the ANGLE button
again.
1/6
1
When an ANGLE mark is
shown, press the ANGLE
button, then an ANGLE
select icon will appear at
the upper left hand corner
of the screen.
Using the Zoom Function (DVD/VCD)
2
Press the UP/DOWN ▲▼ or
LEFT/RIGHT œ√ buttons to
select the part of the
screen you want to zoom.
Press the ENTER button.
1
During playback or pause
mode, press the ZOOM but-
ton on the remote. A square
will be displayed on screen.
• During DVD playback, press the ENTER button to zoom in 2X/4X/2X in order.
• During VCD playback, press the ENTER button to zoom in 2X.
01640A(E)-CHAPTER 5 4/13/05 10:35 AM Page 13