Sennheiser SR 3254 - Manual (Page 15)

14
Connecting the transmitter to the mains
The transmitter can be connected to 230 V or 115 V AC. Before
you plug the mains connector into the wall socket, please first
check that the transmitter is set to the correct mains voltage!
The set voltage is shown at the top of the fuse holder
¸
.
Selecting the mains voltage
To select the mains voltage, proceed as follows:
̈
Disconnect the transmitter completely from the mains by
pulling out the mains connector from the wall socket.
̈
Use a screwdriver to loosen the fuse holder
¸
.
̈
Remove the fuse holder with the inserted fuse.
̈
Turn the fuse holder by 180° and reinsert it.
The set voltage is shown at the top of the fuse holder.
Electric shock hazard!
In case of improper handling, you may come
into contact with electrically conducting parts
and receive an electric shock when removing
the fuse holder.
̈
Before removing the fuse holder, pull out the
mains connector from the wall socket.
WARNING!