Sony 3-869-574-12(1) - Manual (Page 33)

33
High-Speed and Low-Speed Search—Quickly and Accurately Determining Editing Points
C
h
a
p
te
r 3
C
o
nv
e
n
ien
t F
u
nc
ti
on
s
f
o
r E
d
iti
n
g
O
p
er
at
io
n
High-Speed and Low-
Speed Search—Quickly
and Accurately
Determining Editing
Points
Use the search function to easily locate the desired scene
and to quickly and accurately determine edit points.
Search Operations via External
Equipment
You can control the unit in the following operation modes
from an editing control unit (PVE-500, etc.) connected to
the REMOTE connector on the rear panel or from a
SIRCS-compatible remote control unit such as the DSRM-
10 connected to the CONTROL S connector on the front
panel.
Shuttle: Use this mode to view color video playback at
speeds ranging from 0 to 60 times normal speed in
both directions.
Note
When controlling the unit from the DSRM-10 for
shuttle-mode search, the maximum search speed is 16
times normal speed in both directions.
Jog: Use this mode for low-speed search and frame-by-
frame search.
Digital slow: Use this mode for noise-free color video
playback at speeds ranging from 0 to
1
/
2
times normal
speed in both directions.
Still: Use this mode to view a still picture of any field.
Jog audio: Use this mode to monitor the audio at speeds
ranging from 1 to
1
/
30
times normal speed in both
directions.
Note
When controlling this unit from external equipment, be
sure to turn on or off the buttons in the remote control
setting section on the front panel as shown in the following
table.
For description on how to carry out search operations via
external equipment, see the operating instructions for the
equipment.
Search Operations on This Unit
When you perform searching on this unit, be sure to turn
off the REMOTE button on the front panel.
Playing back in jog mode
In jog mode, you can control the speed of playback by the
speed of turning the search dial. The playback speed range
is ±1 times normal speed by factory default. The speed
variation range and pattern can be changed with the JOG
RESPONSE menu item (see page 39).
To carry out playback in jog mode, use the following
procedure.
1
Press the SEARCH button or search dial so that the
JOG indicator in the display section is lit.
Pressing the search dial toggles between jog mode and
shuttle mode.
External equipment Buttons in the remote control
setting section
Editing control unit
connected to the
REMOTE connector Turn on both the REMOTE and 9PIN
buttons.
SIRCS-compatible
remote control unit
connected to the
CONTROL S
connector Turn off the REMOTE button.
Equipment connected
to the DV IN/OUT
connector Turn on both the REMOTE and
i.LINK buttons.
1 1,2,3
dB 0
-12 -20
-30
-40
-60
dB 0
1 0 -1 -2
OVER
1
dB 0
-12 -20
-30
-40
-60
dB 0
1 0 -1 -2
OVER
2
dB 0
-12 -20
-30
-40
-60
dB 0
1 0 -1 -2
OVER
3
dB 0
-12 -20
-30
-40
-60
dB 0
1 0 -1 -2
OVER
4 PB FS 48k44.1k32k
JOG indicator