Sony 3-869-574-12(1) - Manual (Page 52)

52
Connections for an A/B Roll Editing System
Ch
apt
er 5
Con
nec
tions
and
S
e
ttin
gs
Connections for an A/B Roll Editing System
The following is an example configuration of A/B roll
editing system using the DSR-1600A/1600AP. The purpose of the following figure is to clearly indicate
the flow of signals among the component devices in this
system. The specific connections and settings are
described beginning on page 53.
a) An I/O delay of several frames occurs on DME switchers and other
devices equipped with frame memory. It is therefore necessary to
connect an audio delay unit between the audio mixer and the recorder
VCR to adjust for the delay.
Main video monitor Source video monitor
Video signal generator DSR-1800A/
1800AP (recorder)
Audio mixer
(MXP-290, etc.)
Editing control unit
(PVE-500, etc.)
Control signal
DME switcher
(DFS-500/500P,
etc.)
DSR-1600A/1600AP (player 1)
UVW-1600/1600P,
etc. (player 2)
Video signal
Audio signal
Reference video signal
DPS-D7 or other delay
unit
a)
Audio system monitor