Operating your dvd (vcr) with remote control – Samsung 20060510083254531 User Manual
Page 45
44
Operating your DVD (VCR) with Remote Control
•
The remote control may not work on some brands of DVD (VCR)s.
Also, some operations may not be possible depending on your brand
of DVD (VCR).
•
The remote control will work with Samsung DVDs (VCRs) by default.
1
Press DVD button to set the remote to
DVD mode.
2
Press POWER button to turn on the DVD
(VCR).
3
Point the remote control toward the DVD
(VCR).
4
While holding down POWER button, enter
the code corresponding to your brand of
DVD (VCR).
•
If the code matches the DVD (VCR)'s code, the DVD (VCR)
will be turned off.
•
If there is more than one code listed for your DVD (VCR) in
the table, enter one at a time to determine which code works.
•
If you operate VCR, press VCR button to set the remote to VCR mode.
•
You can use DVD (VCR) POWER, VOLUME, PLAY, PAUSE,
STOP, SKIP, MENU and Numeric button (0~9).
5
If DVD (VCR) is turned on or off when you
press the power button of the remote
controller, the setting is completed.
AV-R610 XAC ENG-1 5/5/06 14:4212:0 Page 44