Options during a call – Samsung Eternity II SGH-A597 User Manual
Page 45
Call Functions 40
2.
The following data items are displayed:
• Last Sent: shows the size of the last data packet sent (measured in
KB - kilobytes) since the last time this counter was reset.
• Last Received: shows the size of the last data packet received
(measured in KB - kilobytes) since the last time this counter
was reset.
• Total Sent: shows the amount of data sent (measured in KB -
kilobytes) since the last time this counter was reset.
• Total Received: shows the amount of data received (measured in
KB - kilobytes) since the last time this counter was reset.
3.
To set these counters back to zero, touch Reset.
• Place a checkmark adjacent to those individual fields you would
like reset.
• Touch Select All to place a checkmark adjacent to all fields.
4.
Enter the password and touch Confirm to reset all
counters. For more information, refer to “Change Phone
5.
Press
or
to cancel this operation.
Options During a Call
Your phone provides a number of control functions that you can
use during a call.
Adjusting the Call Volume
During a call, to adjust the earpiece volume, use the Volume keys
on the left side of the phone.
ᮣ
Press the Up volume key to increase the volume level and
press the Down volume key to decrease the volume level.
In Idle mode, you can also adjust the ringer volume using these
same keys.
In-Call Options
During an active call there are several functions available by
touching a corresponding on-screen button.
•
Speaker On/Off routes the phone’s audio through either the speaker
or through the earpiece.
–
Slide Speaker to On to route the audio through the speaker. (You can
adjust the speaker volume using the volume keys.)
–
Slide Speaker to Off to use the phone’s earpiece (see “Using the
Speakerphone During an Active Call” on page 42.)
•
Mute/Unmute turn the onboard microphone either on or off.
–
Touch Mute during a call to mute the microphone.
–
Touch Unmute to unmute the microphone.
•
Video Share lets you share video during an active call. For more
information, refer to “Video Share” on page 35.