Sony RDR-HXD790 - Manual (Page 142)

142
Selects the thumbnail type shown in the Title
List.
You can see the CI information. The
displayed information differs depending on
the CI module.
You can check the current software version
of the built-in digital tuner and keep it up to
date with the latest software.
Manual Update
Updates the software manually.
To cancel, press SYSTEM MENU.
The new software will be available next time
the recorder is turned on.
Auto Update
Technical Info.
You can check the current hardware and
software versions of the digital tuner.
Other Settings
(Options 2)
You can make other operation settings.
Restart USB Device
Restarts the connected USB device if it does
not respond to the recorder. If the connected
USB device still does not work properly, try
following:
– Turn the connected USB device off and on
again.
– Disconnect and then connect the USB
cable.
Confirm Printer
Displays the manufacturer and model name
of the printer connected to the recorder. Note
that this function may not work depending
on the printer.
Selects the tuner for the TV Pause (page 79).
Set Preview (HDD only)
Quick
Preview Plays short excerpts from
throughout the selected
title.
Normal Plays the selected title
from the beginning.
CI Information (RDR-HXD795/
HXD895/HXD995/HXD1095
only)
Software Update
On Updates the software
automatically. Normally,
select this position.
Off Does not update the
software automatically.
USB
TV Pause
TV’s Tuner Selects this when
connecting the recorder to
your TV using the SCART
jack.
Recorder’s
Tuner Selects this when
connecting the recorder to
your TV not using the
SCART jack.