Samsung WS-32Z308T - Manual (Page 16)

English - 16
Adjusting the Picture Settings
Your television has several settings which allow you to control picture quality.
1
Press the MENU ( ) button to display the menu.
2 Press the ▲ or ▼ button to select Picture, then press the ENTER ( )
button.
3 Press the ENTER ( ) button twice to select Mode.
4 Press the ▲ or ▼ button to select the required option, then press the
ENTER ( ) button.
Available options: Dynamic - Standard - Movie - Custom
5 Press the ▲ or ▼ button to select the option to be adjusted, then press
the ENTER ( ) button.
Available options: Contrast - Brightness - Sharpness - Colour -
Tint (NTSC only)
6 Press the ◄ or ► button to reach the required setting.
7 Press the MENU ( ) button.
8 Press the ▲ or ▼ button to select Colour Tone, then press the ENTER
( ) button.
9 Press the ▲ or ▼ button to select the required option, then press the
ENTER ( ) button.
Available options: Cool2 - Cool1 - Normal - Warm1 - Warm2
Resetting the Picture Settings to the Factory Defaults
10 Press the ▲ or ▼ button to select Reset, then press the ENTER ( )
button.
The previously adjusted settings will be reset to the factory defaults.
11 Press the EXIT ( ) button to exit.
➢
◆ The reset function is set for each picture mode.
◆ The television has an “automatic degaussing” system that is activated if
magnetic interference is present. To degauss the television screen, switch
power off by pressing the “ ” button (On/Off) on the front panel. (Refer
to “Automatic Degaussing to Remove Colour Patches” on page 29.)
Contrast
Move Adjust
90
Mode
Mode : Dynamic 
Contrast : 90 
Brightness : 50 
Sharpness : 50 
Colour : 50 
 More
Move Enter Return
T V
Move Enter Return
T V
Mode
 More
Colour Tone : Normal 
Reset
Move Enter Return
T V
Mode

More
Colour Tone : Normal 
Reset
AA68-03784A-X0Eng_UK_VE.indd 16 2006-05-26 ｿﾀﾀ・9:29:37