Sharp Aquos LC 32D6U - Manual (Page 12)

11
Part names
TV (Rear)
* Press RESET if the TV cannot return to its original state after performing various operations.
• AV MODE resets to DYNAMIC (Fixed)
• TV channel returns to initial channel (Air:2ch, Cable:1 or 2ch)
• Audio setting initializes
• Surround resets to off
• Image position initializes
** Press SYSTEM RESET if the TV does not operate after starting up.
NOTE
• Pressing RESET will not work if the TV is in standby mode.
• Pressing RESET will not delete channel preset or secret number. See page 41 for clearing the secret number when you
know it. See page 58 for initializing to the factory preset values when you forget your secret number.
RESET*
INPUT 3
terminals
SYSTEM RESET**
ANALOG IN
terminal
AC INPUT terminal
RS-232C
terminal
INPUT 2
terminals
INPUT 1
terminals
INPUT 4 terminals
MONITOR OUTPUT terminals
CableCARD™ slot
DIGITAL AUDIO
OUTPUT terminal
DIGITAL AIR IN
terminal DIGITAL CABLE
IN terminal
LC-32D6U(E)-001-012 05.8.8, 10:10 AM 11